Use - DS Produkte 03981 Gebrauchsanleitung

EN

Use

NOTE!
■ Make sure that the device remains stable during operation. Always hold the motor
unit fi rmly with one hand.
■ Do not move the device during use. Always remove the mains plug from the plug
socket and allow the motor to come to a complete standstill before transporting the
device.
■ Never place the motor unit on a soft surface. The ventilation openings on the bottom
of the motor unit must not be covered.
■ Do not overfi ll the device! Make sure that the maximum fi ll level (MAX marking in the
shaker) is not exceeded!
■ The device should only be used if it has been completely and correctly assembled!
When processing frozen fruit or vegetables, always pour a little liquid into the
shaker (1, 5) as well.
Although the device is not suitable for chopping up ice cubes, a few ice cubes
can be added and then blended as ingredients to make smoothies, for example.
For good results, hard foodstuffs should not be processed in large pieces. If
necessary, chop them into cubes approx. 3 cm in size beforehand.
Nuts should only be added to the shaker and chopped up in small portions.
The device has overheating protection and switches off automatically if it is
overloaded. Allow it to cool down for a few minutes before switching it on again.
We recommend that you do not leave the device switched on for longer than 1
minute without interruption.
1. Pour the ingredients into the shaker (do not exceed the MAX marking in the shaker!).
■ The plastic housing of the blade attachment contains a
sealing ring. These ensures that the shaker does not
leak. Make sure before each use that the sealing ring
is correctly inserted in the groove!
2. Depending on the type of ingredients, choose either the fl at-
blade attachment (2) or the cross-blade attachment (4) (see
"Items Supplied and Device Overview") and screw it onto the
shaker as far as it will go.
16