Servicing And Cleaning; Technical Details - m-e CR-D300 Betriebsanleitung

SERVICING AND CLEANING

Servicing or repair works can only be
performed by a qualified person or at
a special service centre. There are no
components in the product that need
to be serviced. At no point must it be
opened or disassembled given the
danger of electric shock.
• The external surface can be cleaned by
using a dry, soft and clean cloth. Do not
press too hard on the front panel or on the
casing, as this can leave scratch marks on
the surface.
• Dust can be easily removed by using a soft
and clean brush with long hairs and bristles
and a vacuum cleaner. In no event must an
aggressive cleaning agent or other chemical
solutions be used since that can affect the
casing or impair its proper functioning.
DISPOSAL
Dispose of the product at the end of its
lifespan in compliance with the valid
statutory provisions.

TECHNICAL DETAILS

Receiving frequency: 433.92 MHz
Operating voltage: 230 V/AC, 50 Hz
Protection class: I
Power input: max. 200 W ohmic load;
max. 100 W inductive load; 5-20 W LED
LED: lights up by activating the outlet/device
Dimensions: (WxHxD): 58 x 109 x 72 mm
Operating temperature range: 0 °C to +35°C
Range (free field): up to 70 m
EN
17