Axis P1204 Installationsanleitung Seite 18

AXIS P12 Network Camera Series
2. Attach the upper end of the main unit to the DIN rail or the mounting rail and snap
the lower end into place.
3. Proceed with the instructions for the appropriate sensor unit below.
How to Install AXIS P1204 Sensor Unit
Important
The casing of the AXIS P1204 sensor unit is not approved for outdoor use - the product
may only be installed in indoor environments.
The AXIS P1204 can be mounted in three different ways:
• Flat on any surface.
• Angled on any surface, using the angled fastening bracket.
• Covertly behind a thin material, for example a metal sheet in a door post or an ATM
machine.
Flat Surface Installation
1. Fasten the camera to the wall or ceiling, using screws and plugs appropriate for the
wall/ceiling material.
2. Snap on the cover.
3. Proceed to Connect the cables, see Connect the Cables on page 24.
18