How Do I Set The Temperature; How Do I Enable Or Disable The Smart Thermostat Head; Other Homewizard Applications; Maintenance - Smartwares SHS-53000 Gebrauchsanleitung

8 Press 'Radiator valve Name'. Fill in a preferred name for the device and press 'OK' (Android)
or 'Ready' (iOS).
9 Press 'Code' and then press 'Generate new code'.
A beep sounds , and the smart thermostat head is linked up with HomeWizard.
10 Press the check mark in the upper right of the screen.
The smart thermostat head has been added to the HomeWizard app and is to be found on
the home screen under 'Thermostat head'..
Perform the above steps for the other heating controller. See paragraph 8.7 for adding a remote control.
7.3.2

How do I set the temperature?

1 On the Home screen of the HomeWizard app press 'Thermostat head'. A drop-
down menu appears with the smart thermostat head added by you.
2 Tap on the name of the preferred thermostat head.
A pop-up appears.
3 Move your finger across the screen to choose the correct temperature.
4 Press 'Set' to set the temperature.
7.3.3

How do I enable or disable the smart thermostat head?

1 On the Home screen of the HomeWizard app press 'Thermostat head'. A drop-
down menu appears with the smart thermostat head added by you.
2 Perform one of the following actions:
a. Press the
temperature.
b. Press the
temperature.

7.4 Other HomeWizard applications

You can also use the smart thermostat head in combination with actions, timers and scenes!
1 Actions: if you also linked a thermometer to your HomeWizard, then, in one and the same
action you can also set the thermostat head to switch 'on' by itself when a particular
temperature has been measured.
2 Timers: add a timer to the thermostat head in the HomeWizard app to let it go to a
certain temperature at a desired point in time.
3 Scenes: add several thermostat heads to a 'scene' so that with one press of the button, you
can provide all thermostat heads with the same preferred temperature simultaneously.

8 Maintenance

• The product is maintenance-free, so do not open it. The warranty shall lapse if you open the product.
• Check once a month whether the fixing ring is properly fixed. Bolt the fixing ring tight if it is loose.
• Replace the batteries when the battery indicator begins to flash.
Notice! The memory of the product is saved for 1 minute only.
30 User maual –wireless climate control
icon to connect the smart thermostat head to the high adjusted
icon to connect the smart thermostat head to the low adjusted