InductWarm
Operating and assembly instruction: built-in solution
English version
Version 05/2016 - de/eng
130
®
13
Introduction
The InductWarm
130 was developed to keep food warm and to meet all specific needs of hotels and hospitality. Be-
®
sides the high quality, we also focus on premium design and easy handling.
The InductWarm
130 is a built-in system and can be mounted directly under stone, glass or wood (with a 10-13 mm
®
distance to the dish). The induction field penetrates the carrier material and warms the dish button. In this way the
food can be kept warm, while the carrier material itself will not be heated. There is only a reflection heat from the
dish bottom to the surface. Therefore the carrier material can expand. But with the right choice of material, this ex-
pansion can be reduced to a minimum.
You can find a switch on the device for starting, controlling and stopping the warming operation. The InductWarm
130 is equipped with a four-level temperature control. The different temperature levels (40 - 90°C) can be controlled
by key functions. The first level corresponds to approximately 40 ° C.
Delivery content InductWarm
Article
Description
1
InductWarm
130 device, 750 W
®
2
Power cable 150 mm, country specific plug, 10A
3
InductWarm
Manual
®
Optional accessories InductWarm
4
InductWarm
External remote unit
®
5
InductWarm
Infrared remote control, battery installed
®
14
®
130 built-in solution
Article number
1 13 100 00
6 01 101 00 (CH)
6 01 102 00 (EU)
6 01 103 00 (UK)
6 01 104 00 (AUS)
8 13 100 00
®
130 built-in solution
6 13 500 00
6 10 500 00
®