Alarm Function - Clatronic MRC 7007 Bedienungsanleitung

NOTE:
If the reception is too weak and there is interference on the received station, try to
improve the reception by altering the position and uncoiling or coiling the antenna.
Select the Preset Radio Station
Repeatedly press the SET / PRE / M+ button. One pre-set location after the other will
be called up.
General Information
• You'd like to be woken up by radio? Preset the station and the volume. The device
switches on with the last set radio station and volume level.
• When the alarm time is reached, a dot flashes next to "AL 1 BUZZER" or "AL 1
RADIO" and / or "AL 2 BUZZER" or "AL 2 RADIO".
Setting of the Alarm
You can set two alarm times. Proceed as follows:
1. Switch the device off.
2. Press the AL1 / VOL– button. The indicator begins to flash.
3. Set the hours with the HOUR / TU– button and the minutes with the MIN / TU+
button.
NOTE:
If you do not press a button within 4 seconds, the settings are accepted auto-
matically.
4. Press the AL1 / VOL– button to store the alarm time. Then the current time is
displayed.
5. Then use the AL1 / VOL− button to select how you want to be woken up. Select
from:
• Buzzer ( AL 1 BUZZER ):
A buzzer sounds when the alarm time is reached. The volume of the buzzer
cannot be adjusted.
• Last heard radio frequency ( AL 1 RADIO ):
As soon as your set alarm time is shown, the radio switches on. The last tuned
FM station plays at the last set volume.
MRC7007_CTC_IM

Alarm Function

37
12.10.17