Alarm Function - Clatronic MRC 832 P Bedienungsanleitung

Radio station tuning
1. Set the band selector switch (5) to FM or AM, depending on the frequency band you
want to listen to.
2. Move the function switch (7) to the ON position.
3. Turn the tuning control in order to tune in to a station. An arrow mark on the controller
indicates the tuned frequency.
4. If reception is too weak, change the position of the dipole antenna in order to improve
the reception.
5. The antenna for reception of AM stations is integrated into the unit. The unit can be
tuned to a station by changing the position of the unit.
Volume
The desired volume can be sent using the VOLUME regulator (10).
Setting of the Clock (24 h)
Hours: Press the TIME key (12) and the HOUR key (11) simultaneously.
Minutes: Press the TIME key (12) and the MIN key (8) simultaneously.
Switch-off
The device is switched off if the function switch (7) is in the "OFF" position.
NOTE: This also turns off the alarm function.
Setting of the Alarm (24 h)
Hours: Press the ALARM key (6) and the HOUR key (11) simultaneously.
Minutes: Press the ALARM key (6) and the MIN key (8) simultaneously.
Radio alarm
Once the alarm times are set and a radio station has been selected, shift the function
selector (7) to "AUTO". The " " symbol lights up in the display (15).
NOTE:
As soon as the alarm time is reached, the radio is switched on. The selected radio sta-
tion plays at the set volume.
VHF = FM, medium wave = AM

Alarm function

GB
49