Control, Care And Inspection; Maintenance - Aesculap Suhl FavoritaCL Gebrauchsanweisung

Aesculap Suhl GmbH
Battery-powered clipping machine Favorita

5.2 Control, care and inspection

Allow the product to cool down to room
temperature.
Inspect the product after each cleaning and
disinfecting cycle to be sure it is clean, functional
and undamaged.
Lubricate the blade as appropriate, see Chapter
Lubricating the blade.
To enhance the cutting power, adjust the plate
pressure as required, see Chapter Adjusting the
plate pressure.
Check the product for any damage, a typical
running noise, overheating or excessive vibration.
Inspect the blade for broken, damaged or blunt
cutting edges.
Set aside the product if it is damaged.
10
/Libra
CL
6.

Maintenance

To ensure reliable operation, Aesculap recommends
servicing the product at least once a year.
Service addresses
In the UK
KG PRODUCTS
243-251 City Road, Fenton
Stoke-on-Trent, Staffs
ST4 2PX
United Kingdom,
Phone (44) - 01782 844 866
DIAMOND EDGE
126 Gloucester Rd.
Brighton, BN1 4BU.
United Kingdom
Phone (44) - 01273 605 922
Or in the US
A & J Sales and Service
42 - A Frame Drive
West Burke, VT 05871
USA
Phone: (800) 447-1957
Or in Germany
Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach / Germany
Phone: +49 (0) 8086 933-100
Fax: +49 (0) 8086 933-500
E-Mail: info@kerbl.com
www.kerbl.com
Other service addresses can be obtained from the
address indicated above.