Parts Descriptions; Functional Description - Makita BBC231U Betriebsanleitung

PARTS DESCRIPTIONS

BBC231U / BC231UD
4
3
6
1 Battery cartridge
2 Indication lamp
3 Switch trigger
4 Hanger (suspension point)
5 Grip
6 Guard (cutting attachment guard)
013124

FUNCTIONAL DESCRIPTION

WARNING:
• Always be sure that the tool is switched off and
battery cartridge is removed before adjusting or
checking the functions on the tool. Failure to switch
off and remove the battery cartridge may result in
serious personal injury from accidental start-up.
Installing or removing battery cartridge
(Fig. 4)
CAUTION:
• Always switch off the tool before installing or removing
of the battery cartridge.
• Hold the tool and the battery cartridge firmly when
installing or removing battery cartridge. Failure to
hold the tool and the battery cartridge firmly may cause
them to slip off your hands and result in damage to the
tool and battery cartridge and a personal injury.
1
2
10
7
8
BBC300L / BC300LD
2
5
5
9
6
7 Gear case
8 Cutting tool
9 Shoulder harness
10 Buckle
11 Barrier
12 Guard extension
To remove the battery cartridge, slide it from the tool while
sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip it
into place. Insert it all the way until it locks in place with a
little click. If you can see the red indicator on the upper
side of the button, it is not locked completely.
CAUTION:
• Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall
out of the tool, causing injury to you or someone
around you.
• Do not install the battery cartridge forcibly. If the
cartridge does not slide in easily, it is not being inserted
correctly.
Power switch action
WARNING:
• Before inserting the battery cartridge in the tool,
always check to see that the switch trigger
1
3
4
11
9
12
10
7
8
13