Troubleshooting; Technical Data - RUSTA SHIATSU PREMIUM Gebrauchsanweisung

scraped or broken. Do not store in direct sunlight or in a high temperature. If you will not
be using the product for a long time, use a dust cover to prevent dust from getting in to
the massager.
CLEANING
• Before cleaning, make sure that the power is off and that the plug is not connected.
Use a dry cloth to clean the surface of the massager. Do not use a corrosive cleaner.
• The fabric cover can be removed and cleaned separately by hand wash only.

TROUBLESHOOTING

If you experience any problems during use, please refer to the following tips. If the
product still doesn't work, please contact customer service at Rusta.
PROBLEM
Massager does not
work.
A sudden stop.

TECHNICAL DATA

Rated voltage
Rated duration
Rated power
Voltage
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately
from household waste. They should be taken
for recycling in accordance with local rules for
waste management.
CAUSE
No power.
Power is off.
Massage time has exceeded
20 minutes.
Working time is too long, the
massager is overheated.
Massage heads are
blocked.
12V
10–20 minutes
36W
220–240V~50/60Hz
SOLUTION
Access the massager to a power supply..
Check that the power supply is connected..
Re-start by pressing the on/off button.
Re-start after unplugging the massager
and letting it rest for at least 15 minutes.
Make sure that your feet are relaxed
during massage. Make sure that nothing
else is trapped in the massager.
5