Mode Descriptions - Inline 4 x 4 MultiView HDMI Matrix Anwenderhandbuch

Mode descriptions

12
Matrix mode: Viewing video sources up to 4 displays.
■ Press 1~4 to select the video source, press A~D to select the display.
■ To distinguish the input source or output display, refer to the LED
indicators on the front panel of unit.
PIP mode: Viewing main image with 1 subordinate image in smaller
window.
■ Press 1~4 to select the video source of main image .
■ Press A~D to select the video source of subordinate image .
■ Flexible local the subordinate image and zoom control features are
available in this mode. The subordinate image can be positioned
anywhere using mouse to drag and drop. To enlarge/reduce the
subordinate image, drag the subordinate near a corner using mouse.
■ Double click the subordinate image to swap between main and
subordinate image.
Windows mode: All video sources can be viewed simultaneously with
various window sizes and positions.
■ Press 1~4 to select the audio source and locate the window to the top.
■ Press A~D to turn on/off the windows.
■ Click the preferred windows to overlap other windows by mouse.
■ All windows can be positioned anywhere using mouse to drag and
drop. Windows size can be changed as well, drag the preferred window
near a corner using mouse.
■ Double click left button of mouse to display the desired window in full
screen. To exit the full screen display, double click left button of mouse
again. Note that other windows still remain at same position, which is
normal.