Operation; Parts And Push Buttons - Inline 4 x 4 MultiView HDMI Matrix Anwenderhandbuch

Operation

Various operations are available from this unit, select your preferred operation as follows:
1. Push buttons.
2. Display mode menu.
3. Keyboard.
4. IR remote control.
5. RS-232 control.

1. Parts and push buttons

Front panel
1
No. Item
1 LED indicators
INPUT
2
3 OUTPUT
4 Recall
5 SET*
6 MATRIX/PIP/
WINDOWS/
VIDEO WALL/PAP/
QUADVIEW
Exit/
7
Lock
Menu/
8
Select
9
(Cursor buttons)
10 IR receiver
11 Reset pin hole
6
2
Description
Indicate the status of display. For example, if the LEDs are illuminated with 3
and C, it means the monitor C is playing back the source from No.3 input.
Choose the desired source from 1~4, and then press the corresponding button.
For more details, refer to the chapter of Mode descriptions.
Choose the desired display from A~D, and then press the corresponding button.
For more details, refer to the chapter of Mode descriptions.
Recall the customized setting configured from SET button. Press to light up the
buttons (1~4 and A~D), and then select the desired setting to recall.
Save the customized input and output up to 8 settings.
1. Select a desired mode by pressing MATRIX/PIP/WINDOWS/VIDEO WALL/
PAP/QUADVIEW button.
2. Set a preferred input source(1~4 ) and output display(A~D).
3. Press SET button, then all the buttons of input(1~4) and output(A~D) will be
flashed.
4. Press a preferred button(1~4 and A~D) to save the setting to the memory of
unit.
Select the desired mode you wish to display, and the pressed button will be
illuminated.
■ Press to exit the OSD menu.
■ Press to lock all the buttons on the unit. To unlock these buttons, press it
again.
■ Press to bring up the OSD menu.
■ Select a desired option on the menu.
Press to navigate the OSD menu.
Receive the signals from bundled remote control.
Use a paperclip to reset this unit if necessary.
34 5 6 7 8 9 10 11