Cleaning, Maintenance And Repair; Service Addresses; Service Intervals - NovoPress ACO202 Betriebsanleitung

ACO202/ECO202
8

Cleaning, maintenance and repair

EN

Service addresses

You can find the addresses of authorised specialist workshops on the "Service addresses"
sheet provided or at www.novopress.de.

Service intervals

Service and repair work may only be carried out by Novopress or the authorised Novopress
specialist workshops.
The next service is indicated by an inspection sticker on the press tools. This sticker, the colour
of which is changed each year, indicates the date of the next service (month/year). This applies
both to new devices and components and to the individual service intervals for the equipment.
Routine inspection (before use, at the start of the working day) and when soiled
(Fig. 10)
Check for visible damage, material cracks and other signs of wear. If defects are found, do not
use the device and have it repaired.
Six-monthly inspection
Have the device inspected by a qualified electrician or a Novopress workshop.
Annual inspection
Have the press device inspected and serviced at Novopress or a Novopress workshop.
CAUTION!
Risk of injury during cleaning or repair work from inadvertently pressing
the On switch.
Therefore:
– Comply with the safety instructions and always remove the battery or disconnect
the mains plug before performing cleaning, maintenance or repair work.
22