Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
The following is a list of possible causes of function failure and possible solutions.
A. Malfunction to the belt buckle
• When opening the belt buckle, the buckle sections are released slowly.
• The belt buckle can only be opened with considerable force.
• It is difficult to click the buckle sections into the buckle (too much resistance).
• The buckle will no longer close, the buckle sections will not go together.
• There is no "click" sound when closing the buckle.
B. Solving any problems
• Check the buckle for any dirt and if necessary clean by knocking the dirt out, rinsing, blowing clean
or vacuuming with a vacuum cleaner, for example.
• NOTE! Never use lubricants!
If you are unable to close the belt buckle or if you are unsure whether you have solved the problem
correctly,contact your retailer or importer immediately (see back of instruction manual). Under no
circumstancesshould the Mobi (XP) be used.
5. General instructions
Always pay close attention to the following...
• Prior to purchase, check to make sure the seat fits properly in your car.
• Always use the seat, even on short trips, as this is when most accidents occur.
• Only use the Mobi (XP) in a car and not at home, in an airplane, boat or other recreational vehicle. The child
restraint is approved for car travel only.
• The seat must always be secured with the seat belt, tethers and, if installed on the back seat, with the
support leg, even when not in use. A loose seat could injure other passengers in a sudden stop or crash.
• Never use the Mobi (XP) without its cover. Do not replace the cover with a cover other than the one
supplied by the manufacturer, as the cover contributes to the safety of the seat.
• Always cover up the Mobi (XP) when the car is parked in the sun, as plastic and metal parts may become
extremely hot and discolour the fabric.
• To avoid damage to the fabric, do not remove the logos on the cover.
• Make sure that the Mobi (XP) does not become wedged by or overloaded with heavy luggage, adjustable
seats or slamming the car door.
• Make sure that all luggage and objects likely to cause injury in the event of an accident (on the rear
window shelf for instance) are secured properly.
• If the back seat of the vehicle can be folded forward, make sure the seat back locks are fully locked
before placing a child in the Mobi (XP) on the back seat of the vehicle.
• Take short breaks on longer trips to give your child some freedom of movement.
• The Mobi (XP) is developed for an intensive use of approximately 10 years.
• We advise to check the expanded polystyrene (EPS) parts regularly for damages.
• Never leave your child unattended in the car.
• Save the instruction manual for future reference in the space provided under the Mobi (XP).
• Do not use second-hand products whose history is unknown. Some parts could be broken,
torn or missing.
• Replace the Mobi (XP) when it has been subject of violent stresses in an accident: the safety of your
child can no longer be guaranteed.
• The manufacturer has taken into consideration the fact that car seats may cause indentations in car
upholstery. This is unavoidable, however, due to the prescribed safety standards, and because the car
seat must be installed tightly in order to protect your child. Dorel is not liable for any damage that may
occur to the car upholstery as a result of this.
And it goes without saying...
• Set a good example and always wear your seat belt!
16
6. Accessories
Sun canopy
Cup holder
Summer cover
7. Waste separation
If cared for properly, Mobi (XP) can be used for 2 children or approximately 8 years. However, plastics do
deteriorate with age and exposure to extreme temperatures. Please check the date of manufacture
(stamped in the shell) before using a Mobi (XP) that has been stored for a longer period.
Once your child has outgrown the seat, we recommend that you discontinue using it and discard it as
waste. For reasons of environmental protection, we ask that you separate the waste generated by the Mobi
from the purchase (packaging) to the moment of discarding (product parts), and dispose of it properly.
Keep all plastic packaging away from children to avoid the risk of suffocation.
Packaging
Cardboard box
Plastic bag
Product parts
Fabric cover
Plastic parts
Metal parts
Tether/harnesses
Belt buckle
8. Car Fitting List
The Mobi (XP) is designated as "semi-universal" and therefore suitable for installation in certain types
of cars. These types have been compiled in a list. This list is subject to change and additions. For an
up-to-date version of the car fitting list, please look at the popsheet added to this product and/or retail
outlet for the Mobi (XP), where you can inquire about the suitability of the Mobi (XP) for your specific car.
An up-to-date car fitting list is included with purchase of the Mobi (XP).
9. Warranty
Our 24 months warranty reflects our confidence in the high quality of our design, engineering, production
and product performance. We confirm that this product was manufactured in accordance with the
current European safety requirements and quality standards which are applicable to this product, and
that this product is free from defects on materials and workmanship at the time of purchase. Under the
conditions mentioned herein, this warranty may be invoked by consumers in the countries where this
product has been sold by a subsidiary of the Dorel Group or by an authorized dealer or retailer.
Our 24 months warranty covers all manufacturing defects in materials and workmanship when used in
normal conditions and in accordance with our user manual for a period of 24 months from the date of
the original retail purchase by the first end-user customer. To request repairs or spare parts under our
warranty for defects in materials and workmanship you must present your proof of purchase, made
within the 24 months preceding the service request.
Our 24 months warranty does not apply to defects caused by normal wear and tear, damage caused by
accidents, abusive use, negligence, fire, liquid contact or other external cause, damage which is the
consequence of failing to comply with the user manual, damage caused by use with another product,
EN
Paper waste
Household waste
Household waste
appropriate recycling container
Container for metal
Container for polyester
Household waste
17
Werbung
Kapitel
Inhaltsverzeichnis
