Bluetooth ® Pairing - Hama 014156 Bedienungsanleitung

4.1 Bluetooth
pairing
®
Note
• Check whether your mobile device (MP3 player,
mobile phone, etc.) is Bluetooth
• If not, the only way you can use the FM
transmitter for playback is with a USB stick or
microSD card.
• Note that the maximum range for Bluetooth
is 10 metres without obstacles such as walls,
people, etc.
• Make sure that your Bluetooth
device is on and Bluetooth
• Plug the FM transmitter into a car socket located
near the car radio.
• Make sure that the FM transmitter is within the
maximum Bluetooth
• Open the Bluetooth
device and wait until BT10 appears in the list of
Bluetooth
devices found.
®
• Select BT10 and wait until the FM transmitter is
listed as connected in the Bluetooth
your terminal device. A transmission frequency is
now shown on the display.
Note – Bluetooth
Some terminal devices require a password in
order to connect to another Bluetooth
• If your terminal device requests a password for
connection to the speaker, enter 0000.
capable.
®
capable terminal
®
is activated.
®
range of 10 metres.
®
settings on your terminal
®
settings on
®
password
®
device.
®
Note – Connection impaired
After the FM transmitter and terminal device
have been paired, a connection is established
automatically. If the Bluetooth
established automatically, check the following:
• Check the Bluetooth
device to see whether BT10 is connected. If
not, repeat the steps listed under Bluetooth
pairing.
®
• Check whether your terminal device and the
FM transmitter are less than 10 metres apart. If
not, move the devices closer together.
• Check whether obstacles are impairing the
range. If so, move the devices closer together.
4.2 Audio playback (via Bluetooth
Start and control audio playback on the connected
terminal device accordingly. Alternatively, audio
playback can also be controlled on the FM
transmitter (if the connected device supports this
function).
• Press the
audio playback.
• Press the
one title.
• Press the
one title.
4.3 Audio playback
(via USB stick or microSD card)
• Plug the USB stick into the USB socket marked
with (2); playback will start automatically.
• Insert a microSD card into the card slot (6) on the
FM transmitter; playback will start automatically.
Note
• The capacity of the USB stick or microSD
card must not exceed 32 GB.
• The following formats are supported for
audio playback: MP3.
connection is not
®
settings of your terminal
®
function button to start or pause
function button to jump forward
function button to jump backward
®
)
®
3