EINHELL HH 1600 Originalbetriebsanleitung Seite 11

Anleitung_HH_1600_SPK7:_
Do not switch on the equipment until it has
adopted the ambient temperature. Accumulating
condensed water can damage the heater.
D
This equipment is not designed to be used by people
(including children) with limited physical, sensory or
mental capacities or those with no experience and/or
knowledge unless they are supervised by a person
who is responsible for their safety or they have
received instructions from such a person in how to
use the equipment safely. Children must always be
supervised in order to ensure that they do not play
with the equipment.
CAUTION
Read all the safety regulations and instructions.
Any errors made in following the safety information
and instructions set out below may result in an
electric shock, fire and/or serious injury.
Keep all safety information and instructions in a
safe place for future use.
2. Layout (Fig. 1/2)
1 Foot switch
2 Radiator 1
3 Radiator 2
4 Carry handle
5 Topple cut-out switch
3. Items supplied
Open the packaging and take out the equipment
with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts.
There is a danger of swallowing or suffocating!
Halogen heater
Base width extension (2-piece)
Original Operating Istructions
20.03.2012 9:38 Uhr Seite 11
4. Intended use
The equipment is designed exclusively for use as an
additional heater in dry, closed rooms. It is designed
to be operated only when placed on the floor.
The equipment is not suitable for heating baby's
changing tables or for drying towels and textiles.
The equipment can be used indoors in a free
standing position. Keep the equipment housing a
minimum distance of 1 m away from any walls and
combustible materials (furniture, curtains, etc.). The
equipment may only be used completely mounted
and standing vertically on a stable surface. It is
prohibited to operate the equipment on an instable
surface (e.g. on a bed).
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data:
Rated voltage:
Heat output:
6. Before starting the equipment
6.1 Assembly
1. Fig. 2: Remove the two screws (a) on the bottom
of the heater.
2. Fig. 3: Remove the two screws (b) on the bottom
of the base width extension (7).
3. Fig. 4: Push the base width extension (7) into the
guides on the side of the heater base.
4. Fig. 5: Use the two screws (a) to fasten the 2-
piece base width extension to the bottom of the
heater and use the two screws (b) to join the two
pieces of the width extension together.
5. Set the equipment upright and remove all the
protectors (Fig. 4 / Item c) from the two radiators.
7. Using the equipment
Important. Before using the equipment for the first
time, check that the voltage supply is the same as the
voltage details set out on the rating plate. Read the
safety regulations in section 1.
GB
220-240 V ~ 50 Hz
1600 W (2 x 800 W)
11