Getting Started - cefar easy Benutzerhandbuch

3. GettinG started

GB
PlEASE REAd ThE PRECAuTioNARY MEASuRES - SECTioN 12 - BEFoRE uSiNG ThE CEFAR EASY.
1. insert the Batteries
insert the batteries according to the
picture.
2. attach the electrodes
A. Connect the electrodes
B. Attach the electrodes C. Connect the cable
to the cable.
to your body. to the CEFAR EASY.
3. sWitch the stimulator on
Press the oN/oFF button . it can be used
for terminating the stimulation at all times, even
when the key lock is activated. Always switch off
stimulation before removing electrodes from the
skin.
4. choose a proGram
For further information on the programs,
see section 5.
5. raise the amplitude (intensity of the stimulation)
Push the button until you reach a comfortable
level of stimulation. Always increase the
amplitude cautiously. To pause the program,
lower the amplitude to 0 with .
BE SuRE To REAd ThE REST oF ThE MANuAl To FullY BENEFiT FRoM YouR CEFAR EASY.
3