Troubleshooting - cefar easy Benutzerhandbuch

8. accessories
Cefar also offers accessories to the CEFAR EASY.
For purchase information, contact your Cefar dealer or visit www.cefar.se.
• CEFAR EASY BELT
• CEFAR EASY SELF-AdhESivE ELECTRodES
• Y-CABLE

9. trouBleshootinG

the stimulation does not feel the same as usual
• Check that all settings are correct and make sure that the elec-
trodes are correctly placed.
· Slightly change the position of the electrodes.
the stimulation current feels unpleasant
· The skin is irritated.
· The electrodes begin to lose their stickiness and do not stick prop-
erly to the skin. Moisten the adhesive surface with a few drops of
water before placing on the skin.
· The electrodes are worn out and need to be replaced.
A lower-back belt is available as an accessory to the CEFAR
EASY. The CEFAR EASY belt makes it easier to relieve lower-
back pain quickly. The belt is designed to give you warming
support and correct placement – every time!
Electrodes get worn out and needs to be replaced. it is recom-
mended to replace the electrodes after approximately 20-40
times of usage.
with the help of a so-called Y-cable, the number of electrodes
can be doubled.
GB
7