Discription Of Components - Quintex QM Series Betriebsanleitung

Betriebsanleitung / Operation manual
Heizkreis / Heating circuit QM

6. Discription of components

Q_ _ - _ _ _ - _ _ - _ _ _ / _ _ _ _
M1 = connect.heating cable ILL
M2 = connect.heating cable ILLW
M3 = connect.heating cable ILM
M4 = connect.heating cable ILMP
H1 = connect.heating cable ILH
H2 = connect.heating cable ILS
P = power output in W/m at 10°C:
e.g. 15 =15 W/m
Rated voltage:
1=230V
2=115V
3= 24V
Power supply cable:
1 = 3 G 1, 5 mm² Radox
2 = 3 G 2, 5 mm² Radox
5 = 3 G 1, 5 mm² FEP
6 = 3 G 2, 5 mm² FEP
Heating cable end termination:
1 = Dual heat shrink
2 = Polyolefin-end termination
3 = Silicone-Boot HTL
4 = End termination stripfree HTL
Length of heating circuit in m/DM e.g.:
001 = 1 m DM1 = 0,1m
010 = 10 m DM5 = 0,5m
200 = 200 m DM9 = 0,9m
Marking without influence on Ex
protection
Seite /page 12 von/of
15
02/2014