Leifheit AirActive L Bedienungsanleitung Seite 31

To get the best out of your Active Ironing Board, please
follow these instructions for use of the blower function:
Suction function
• holds the fabric firmly on the board to prevent
+
creasing.
Steam extraction
• should be switched on continuously if possible, in
order to remove excess steam from the Active
Ironing Table and from inside the housing.
• enables the steam to penetrate the fibres better,
thus saving time and improving ironing results.
• keeps the Active Ironing Table dry and helps to dry
fabrics even whilst they're being ironed.
• enables laundry items to cool off faster by the
throughput of air, thereby preserving the fabric
quality.
Blower function
• provides crease-free ironing results with delicate
fabrics and items of clothing resting on a cushion
of air.
• protects delicate items.
• enables laundry items to cool off faster by the
throughput of air, thereby preserving the fabric
quality.
• for dry ironing without steam, the blower functions
can remain switched off.
...storing away
When you have fi nished, proceed as follows:
First remove the steam station, fi rst ensuring that you
have read the instructions for use which came with
your steam station and iron.
Switch off the Active Ironing Board (0 setting).
Disconnect the cord for the Active Ironing Board from
the mains and take the steam station plug out of the
socket. Then remove the steam st. from the iron rest.
Cleaning your
Active Ironing Board:
The Active Ironing Board can only
be cleaned when the plug is disconnected
from the mains and when the
steam station has cooled down.
Clean using a soft, damp cloth to wipe
down the appliance.
Do not use detergents
of any kind.
To store the Active Ironing Board away:
Take hold of the Active Ironing Board with both hands,
lift it up slightly and fold together using the lever. Wind
the cord up loosely in loops, making sure that it is not
squashed or kinked.
The Active Ironing Board can be stored away folded up
(with the universal iron rest at the top).
Place the Active Ironing Board in a safe position so that
it will not fall over.
The transport lock should be engaged to secure the
frame whilst the board is folded up.
GB
31