Cleaning And Maintenance; Storage; Recycling; Shipping - Fakir BRISE Benutzerhandbuch

EN

Cleaning and Maintenance

• You can clean the exterior surface of the appliance with a dry or a damp cloth. Do not
submerse the appliance in water, do not try to clean it under running water.
• You can clean the concentrator of the appliance with a damp cloth or under running
water. However, to clean the concentrator of your appliance, first remove it. Make sure
the cleaned parts are completely dry before attaching on the appliance.
• Before placing the appliance to its place or its box, ensure that it is completely cooled.
Your appliance comes with a hanger ring for convenient access and storage. Do not
keep the appliance power cord wrapped on the appliance, otherwise the connections
inside the appliance power cord may weaken and snap. If your appliance power cord
is malfunctioning, do not use it and do not attempt to repair it by yourself. If the cable
of the appliance is damaged, in order to avoid any damage, it must be replaced by a
Fakir Authorized Service
• You may remove the appliance air inlet cover by turning it left and after cleaning you
can close it by turning it right.

Storage

• Unplug the appliance from the power outlet and wait for it to cool down.

Recycling

Dispose of the device to the specified waste bins according to the
environmental regulations applicable in your country.
Electrical waste must not be disposed together with household waste.
Dispose the device to the waste bins designated for electrical waste. The
packaging of the device consists of recycling-capable materials.
Dispose them in suitable recycling bins. You can put used dust bags and
filters in general trash cans.
This appliance is compatible with 2002/96/EC WEEE directive

Shipping

Carry the appliance in the original package or a similar, well-padded package to prevent
damage to the appliance.
14