Decoder Functions And Cv Settings; Cv Table - LGB 55028 Bedienungsanleitung

Decoder Functions and CV Settings

Below you will find the functions and CVs laid out in tabular
form. These CVs give you a wide variety of settings and al-
low you to change the assignments of the function buttons.
You can set the track format mfx easily be means of the dis-
play on the CS 2 with Software Version 2.0 and higher. You
or your dealer may have to update your 60213/60214/60215
Central Station.
CV Assignment
1 Address
2 Minimum speed
3 Acceleration delay
4 Braking delay
5 Maximum speed
8 Reset
13 Functions F1 – F8 in the case of alternative track signal
14 Functions FL, F9 – F15 in the case of alternative track signal
17 Long address, higher value byte
18 Long address, lower value byte
19 Multiple unit operation address
21 Functions F1 – F8 in the case of multiple unit operation
22 Functions FL, F9 – F15 in the case of multiple unit operation
Bit 4 = Normal braking behavior
27
Bit 5 = Inverse braking behavior
16

CV Table

Range Comment
1 – 127 Short address
0 – 255
0 – 255
0 – 255
0 – 255
8
0 – 255 Functions for analog operation
0 – 255 Functions for analog operation
192 – 231 Long address must be activated
in CV 29 Bit 5.
0 – 255
0 – 255
0 – 255
0 – 255
0 / 16
0, 16, 32
0 / 32