Device Overview
A
Loudspeakers
B
Microphones on the base unit (2x)
C
LED status displays (on the base unit and the mobile microphones)
See also the LED status displays table.
D
Mobile microphones (4x)
Press
on the microphone to remove it from the base unit and enable it.
E
Microphone key (on the base unit and on the mobile microphones)
Press this key during the call to switch off all the microphones.
Press the key again to switch the microphones on again.
F
MENU key
Press this key to jump to the main menu.
G
OK key
Press this key to select a menu option, save a text you have input, or confirm a
selected entry.
H
Display
See also the Display icons table.
I
Soft keys (3X)
These keys have different functions, depending on the operational state or which
menu is selected. The selected mode or menu is displayed directly above the key in
the display.
If more than one soft key level is present,
function displays.
J
Directional pad
On the home screen and in these pages: Press
than one soft key level is present.
In the menus: Press
or
to scroll through the menu options. Press
a menu option, and press
to go back one level.
During setup: Press
or
to select from predefined entries.
When entering text: Press
or
K
Hook key
Accept call/end call: Press the key each time.
Make a call with dial preparation: enter the phone number and then press this key.
Make a call directly: press this key and then enter the phone number.
L
Volume key
Idle state or when ringing: increase/reduce the ringtone volume or switch it off
completely.
During a call: increase/reduce the loudspeaker volume.
M
Back key
Press this key to return to the previous step and, if necessary, exit the current action.
Any changes you made are not saved.
N
Call hold key
Press this key to put the call on hold. To resume the call, press the Resume soft key.
If you have more than one call on hold, press
the call you want to continue and then press the Resume soft key to resume it.
and
appear in the display, next to the
or
to switch between levels more
to move the cursor.
or
on the directional pad to select
to confirm