Additional Functions; Display Icons; Led Status Displays - Auerswald COMfortel C-400 Kurzanleitung

Conference Functions
Using the mobile microphones
Remove the mobile microphones from the base unit to enable them.
Three-way call
1. Once a connection with the first subscriber has been created, press the Conf soft key.
The call to the first subscriber will continue.
2. Dial the second phone number.
3. Once a connection with the second subscriber has been created, press the Conf soft key
again to start the conference call.

Additional Functions

Call up the redial list
Redial soft key
Call up the call log
Call Log soft key
Dial from the contacts list
Directory soft key
Add new contact to directory
Directory soft key and Add soft key
Transfer with announcement
Transfer soft key
Transfer without announcement
Transfer soft key, Blind soft key and Transfer soft key
Switching on call forwarding
MENU > Features > Call > Call forward.
Configuring short code keys
MENU > Features > Speed dial.
Switch on do-not-disturb mode
MENU > Features > Call > Do Not Disturb.
COMfortel € C-400
Conference Telephone
Quick Guide

Display icons

Received call
Received call
Missed call
Hands-free function enabled
Call diversion enabled

LED status displays

LED status Base unit
Orange: shining constantly Mailbox messages present Battery is charging
Orange: flashing Network failure
Green: shining constantly Hands-free function is in
use
Green: flashing quickly Received call
Green: flashing slowly Call on hold
Red: shining constantly Do-not-disturb enabled
Red: flashing slowly ---
Green and red: flashing quickly ---
V01 02/2018
English
English
Ringtone off
Do-not-disturb enabled
Account registered
Account deactivated
Account not registered
Mobile microphones
Battery low
Microphone is in use or PC
mode
Received call
---
Do-not-disturb enabled
Microphone is in pager mode,
out of range or not registered
Registration mode