Canton Digital Movie 5 Bedienungsanleitung Seite 57

Problem Possible cause
The DM system does 1. The SEL function is deactivated (MAN).
not switch automati-
2. Bluetooth
cally to the BT input.
mobile end device.
3. The DM system is connected to a different
mobile end device.
4. The mobile end device is not connected to
the DM system.
No playback via 1. There is no connection between the
Bluetooth ® wireless DM system and the mobile end device.
technology.
2. The mobile end device is paired but
no playback takes place.
3. You are out of range (the max. distance is 10 m).
® has been deactivated on your
Solution
1. Activate the SEL function (AUT).
2. Activate Bluetooth ® on your mobile end device.
3. Deactivate Bluetooth on the other mobile end device.
®
4. Connect your mobile end device to the DM system
(Page 47).
1. Connect your mobile end device as described.
2.1. The mobile end device must be connected again.
2.2. Set the volume on the mobile end device to maximum.
2.3. Increase the volume of the DM system.
2.4. Ensure that interference sources like a WLAN router
or laptop are not set up in direct proximity of the DM
system.
2.5. Concurrent operation of WLAN and Bluetooth
connection from a mobile end device is not possible
without interferences in most cases: Disable WLAN
(WiFi) at your mobile device.
3. Reduce the distance between the Soundbar and your
mobile end device.
English
®
3 5 7