Thrustmaster Ferrari 458 Challenge Edition Benutzerhandbuch Seite 3

Once you have installed the Ferrari GTE Wheel, rotate it 180° (when facing the wheel, the Ferrari® logo
should be upside down) to access the small attachment screw located on the ring of the Thrustmaster
Quick Release device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use
excessive force), turning it clockwise.
Do not use excessive force when tightening the small attachment screw
(using a Phillips screwdriver)!
Stop turning the screw as soon as you feel some resistance.
PC MAPPING
2/6