General Safety Regulations; Technical Data; Layout And Items Supplied; Proper Operation - Einhell Royal RGH 2040 Bedienungsanleitung

Anleitung RGH 2040_SPK1:Anleitung EGH 2745_SPK1
GB
Packaging:
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled.
When using the equipment, a few safety precau-
tions must be observed to avoid injuries and
damage.
Read the operating instructions carefully and
comply with them. It is important to consult these
instructions in order to acquaint yourself with the
equipment, its proper use and the important safe-
ty regulations.
Keep this manual in a safe place so that the
information is available at all times.
If you give the equipment to any other person,
make sure that you pass on these operating
instructions as well.
We can accept no liability for damage or acci-
dents which arise due to non-compliance with
these instructions.

1. General safety regulations

The enclosed booklet contains general safety instruc-
tions and explains the meanings of the various infor-
mation signs.

2. Technical data

Mains voltage: 230 V ~ 50 Hz
Power input:
Idle speed n :
0
Branch diameter: max. 40 mm
L sound pressure level:
pA
L sound power level:
WA
Weight:
3. Machine layout and items supplied
(Fig. 1/2)
1 Loading funnel inlet
2 Loading funnel
3 Motor housing with cutter plate
4 Prodder
5 Complete chassis
6 Wheels
7 Axle (complete with washers and nuts)
12
8 Transport handle
9 Mains plug
10 Overload switch
11 ON/OFF switch
12 Safety screw
13 Wheel hubs
14 Ring wrench
15 Shredded material bag

4. Proper operation

This electric garden refuse shredder is designed only
for shredding organic garden waste. Place biological-
ly degradable material, e.g. leaves and branches,
into the loading funnel.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the equip-
ment is used in commercial, trade or industrial busi-
nesses or for equivalent purposes.
Collecting the shredded material
The shredded material bag supplied with the
machine can be placed under the chute opening.
5. Assembling the garden shredder
The garden shredder is delivered unassembled. The
chassis and the wheels must be fitted before use.
Follow the operating instructions step-by-step and
use the pictures provided as a visual guide to easily
assemble the machine.
2000 W
4500 rpm 5.1 Assembling the chassis (Fig. 3)
Place the motor housing upside down on the
floor.
86 dB
Insert the chassis into the provided openings as
107 dB
far as it will go.
10.5 kg
5.2 Assembling the axle and wheels (Figs. 4-10)
Remove the nuts and washers from the axle.
Mount the chassis as shown in Figs. 4-10.

6. Starting up

6.1 Connecting up the machine and switching it
on
Connect the coupling on the machine connection
cable (extension) to the power cable (Fig. 1/Item
9).
17.01.2007 8:31 Uhr Seite 12