Mitsubishi Electric MAC-567IF-E Installationshandbuch Seite 9

<ATW indoor unit>
Cylinder unit
Mounting
cord clamp 4
Screw 3
Mount in the same procedure for room air conditioner. Please refer to "When mounting on the wall"
on page 6.
(2) Turn on the breaker of the room air conditioner or the ATW unit and check
that the LED indication of the Wi-Fi interface enters the initial state shown on
right.
Setting up
Refer to SETUP QUICK REFERENCE GUIDE (Included in same package) and SETUP MANUAL to
connect to a Router for setting up.
For SETUP MANUAL, please go to the website below.
http://www.melcloud.com/Support
For MELCloud User Manual, please go to the website below.
http://www.melcloud.com/Support
5. Specifications
Input Voltage
Power consumption
Size H×W×D (mm)
Weight (g)
Transmitter power level (MAX) 17.5 dBm @IEEE 802.11b
RF channel
Radio protocol
Encryption
Authentication
Software Ver
Length of cable (mm)
For Declaration of Conformity, please go to the website below.
http://www.melcloud.com/Support
Hydrobox
Screw 3
Mounting
cord clamp 4
DC12.7 V (from indoor unit)
MAX 2 W
79×44×18.5
110 (including cable)
1ch ~ 13ch (2412~2472 MHz)
IEEE 802.11b/g/n (20)
AES
WPA2-PSK
XX.00
2,040
Connecting to Cylinder unit
150
Connecting to Hydrobox
150
150
Initial State
ERR
NET
MODE OFF
UNIT
150
OFF
OFF
Flashing
GB-8