Product Introduction - Mitsubishi Electric MAC-567IF-E Installationshandbuch

2. Product Introduction

No. Item
1 MODE switch
2 RESET switch
3 ERR LED (Orange)
4 NET LED (Green)
5 MODE LED (Orange) It shows the Access point mode state.
6 UNIT LED (Green)
(1) MODE switch
● The MODE switch is used for selecting modes in configurations.
(2) RESET switch
● Hold down the RESET switch for 2 seconds to reboot the system.
● Hold down the RESET switch for 14 seconds to initialize the Wi-Fi interface to the factory default.
When the Wi-Fi interface is reset to the factory default, ALL the configuration information will
be lost. Take great care in implementing this operation.
3. Parts
Interface unit
(with connecting
cable)
Fixing screw for
3.5×16 mm
Fixing screw for
4×16 mm
GB-5
Description
It selects modes.
It resets the system and ALL settings.
It shows the network error state.
It shows the network state.
It shows the indoor unit state.
1
2
1
Mounting cord clamp
Fastener
(for bundling the wires)
Holder
Clip
ERR
NET
MODE
UNIT
RESET MODE
1
1
1
1