Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
On releasing the key, the first menu item ("10") will appear.
A repeated brief pressing of the key will result in all the menu items being displayed.
Menu item
Sub-item
10
11
12
20
30
The menu entries 40 to 100 are not assigned.
By pressing the key, you will quit the menu after menu item 100, and the setting will be
saved.
The device will now display the water level for 30 seconds. Following this the display will
clear.
If, after activating a menu item, you do not press the key for a period of 10 minutes, the
device will automatically quit the menu program and the display will clear.
Changing or deleting the calibration
The calibration may be repeated at any time.
To delete the calibration, please press the key and keep pressed down for at least one minute.
As soon as you press the key, the number being displayed will blink three times before being
continuously displayed. A minute later the "C" display will start blinking. The previously set
calibration is now deleted. Pressing the key again will now cause the display to clear. If you
then briefly press the key again the number "188" will briefly appear on the display, followed
by the letter "C".
You may now perform a new calibration (refer to the section Device calibration).
Device operation
When you switch the device on, it will perform an internal function and display test.
Displaying the
188 number indicates that the device is functioning properly.
Meaning
Continuous display
Display visible for 30 sec
Not assigned
Delete calibration
Key operation
1 x long: selected sub-item appears
1 x long: sub-item changes
1 x short: menu item appears
1 x long until "30" blinks, then
1 x long until "C" is displayed
20 / 36
Werbung
Inhaltsverzeichnis
