Troubleshooting; Technical Specifications; Array Speaker - A.N.T B-TWIG 12 Bedienungsanleitung

5 | TROUBLESHOOTING

PROBLEM LEDS
No sound or very Power LED
low sound level turned off
Power LED turned on,
but low MASTER VOL
ON/LIMIT
LED lit red
Distortion
ON/LIMIT
LED lit green
Booming sound
Harsh sound
Lower frequencies
small attenuation
B-TWIG 12
10 User manual |
SOLUTION
Make sure the device is properly
connected to the mains outlet
Raise MASTER VOL level
Lower MASTER level
Check the source level
Check proper connection between
subwoofer and A/B elements
Lower SUBWOOFER level
Raise SUBWOOFER level
Lower MASTER level
Try reversing subwoofer
phase by pressing the PHASE switch

6 | TECHNICAL SPECIFICATIONS

System type Active column system
Subwoofer
1 x 12" custom speaker - 2.5" V.C
(B-TWIG 12S)

Array speaker

8 x 2.75" Neo custom speakers - 0.75" V.C
(B-TWIG 12CS)
Average dispersion Horizontal 120°
Frequency response 45Hz - 20kHz
SPL - MAX 123 dB
Amplifier Class D
Peak Power (LF+HF) 2000 W
Crossover 24dB/Oct @ 200Hz
LINE IN: 2 x Combo XLR-F + Jack 6,35mm (1/4")
I/O connectors
OUT/THRU: 2 x XLR-M
Controls Master Level, Subwoofer Level, Phase 0°/180°
Power supply 200-240V~ 50-60Hz
Fuse T4A L 250V~
Fastening mechanism Custom slide connector with automatic lock
Cabinet 12mm plywood
Scratch-resistant coating with high mechanical
Surface finishing
resistance
B-TWIG 12S
370 x 603 x 505mm
Dimensions (W x H x D)
14.6" x 23.7" x 19,9"
Weight 19 kg – 41.2 lbs
EMI CLASSIFICATION
According to the standard EN55103 this equipment is designed and suitable
to operate in E3 (or lower E2, E1) electromagnetic environments.
B-TWIG 12CS
105 x 707 x 100mm
4.1" x 28.8" x 3.9"
4.6 kg - 10.1 lbs
B-TWIG 12
11
| User manual