Description; Inputs & Controls - A.N.T B-TWIG 12 Bedienungsanleitung

3 | DESCRIPTION

1 2
5 6
3.1 | INPUTS & CONTROLS
1 ON/LIMIT LED
LED LIT GREEN: the unit is plugged in and the power switch is turned ON.
LED LIT RED: indicates the activation of the internal limiter circuit preventing amplifier
distortion and protecting the speakers against overloads. In this case, reduce the
MASTER level signal and that of the sound source.
2 MASTER LEVEL
This control adjusts the output level of the system. Turn the knob clockwise to
increase volume, or counterclockwise to decrease it
3 SUBWOOFER LEVEL
This control adjusts the output volume of the subwoofer and allows you to balance
the level of low frequencies, depending on environment acoustic response. Turn the
knob clockwise to increase volume, or counterclockwise to lower it.
4 PHASE 0°-180°
Press this button to reverse of 180 degrees the subwoofer phase.
B-TWIG 12
4 User manual |
3 4
7 8
5 LEFT OUT/THRU
XLR-M balanced output to link the IN LEFT input signal to another active
system.
6 COMBO LEFT INPUT
Left channel balanced input with Combo
(XLR-F + Unbalanced 6.35mm – 1/4" - jack) connector.
7 COMBO RIGHT INPUT
Right channel balanced input with Combo
(XLR-F + Unbalanced 6.35mm – 1/4" - jack) connector.
8 RIGHT OUT/THRU
XLR-M balanced output to link the IN RIGHT input signal to another active
system.
9 SLIDE LOCKING SYSTEM FOR QUICK CONNECTION
This mechanism allows coupling and uncoupling support element to the
subwoofer B-TWIG 12S, ensuring a safe perfect functionality.
The included cover protects the internal contacts from moisture and dust.
10 RECESSED HANDLE
Use this top handle only for subwoofer carrying and positioning.
Do not use it to hang the cabinet or to lock it in any position.
Protective cover Release button
9
10
B-TWIG 12
5
| User manual