Troubleshooting - A.N.T B-TWIG8 Bedienungsanleitung

DISASSEMBLY
• Push forward the B element to release it from the element A (Fig.4)
• Repeat the operation to unlock element A from the subwoofer cabinet (Fig.5)
Fig.4
B
B A
Release B by pushing
towards arrow direction
A
B-TWIG 8
10 User manual |
Fig.5
A
Release A by pushing
towards arrow direction
A

5 | TROUBLESHOOTING

PROBLEM LEDS
No sound or very low Power LED
sound level turned off.
Power LED
turned on, but
low channel
levels.
LEVEL raised,
with no signal
Channel 3
LEVEL raised
but no
Bluetooth
signal
ON/LIMIT
Distortion
LED lit red
ON/LIMIT
LED lit green
Booming sound
Harsh sound
Lower frequencies
small attenuation
SOLUTION
Make sure the device is properly
connected to the mains outlet.
Check the connections between
the sources and the inputs, than
raise desired channel levels.
Check input selectors
Sync again the Bluetooth signal
Lower channel levels
Check the source level
Check proper connection between
subwoofer and A/B elements
Check EQ LOW level
Try distancing the system
from the walls
Check the perfect connection
between subwoofer
and A/B elements
Check EQ HIGH level
Check EQ LOW level
B-TWIG 8
| User manual
11 11