Power Supply Section; B-Twig 12Cs Kit; Instructions For System Assembly And Disassembly - A.N.T B-TWIG 12 Bedienungsanleitung

3.2 | POWER SUPPLY
1
1 MAINS INPUT
IEC mains socket with integrated EMI filter. Each package is supplied with the power
cord for your area. Insert the mains cable into this socket, but make sure the device
is switched off before connecting the cable to the mains. For your safety, never
disconnect the earth lead.
2 FUSE
Protection fuse.
CAUTION: Replace the fuse only with one of the same type and with the same
value. If the fuse blows repeatedly, contact an authorized service center.
3 POWER ON/OFF
Use this switch to turn ON/OFF the unit.
B-TWIG 12
6 User manual |
2
3

3.3 | B-TWIG 12CS KIT

The kit, supplied of its carrying bag, is composed of two column elements:
a stand (A element) and a speaker (B element). Both are equipped with the
slide locking system, which allows the coupling and the quick release of the
elements that make up the system, ensuring a safe perfect functionality.
The included cover protects the internal contacts from moisture and dust in
case of non-use of the system.
A B
4 | INSTRUCTIONS FOR SYSTEM
ASSEMBLY AND DISASSEMBLY
For system installation and to guarantee the correct operation, always
carefully respect following instructions:
• Install the subwoofer in a vertical position on a flat and stable surface,
making sure that all the rubber feet are perfectly adherent to the floor or
to the supporting surface
• Never install the system on mobile trolleys, chairs, tables or similar surfaces
which are not stable and cannot support the weight.
• To allow proper amplification heat dissipation, please leave the right distance
between the rear panel of the subwoofer and other objects such as walls,
corners, curtains. Never place the unit near heat sources of any kind.
• Do not cover the ventilation slots located on subwoofer rear cabinet.
Protective cover
Top view
Audio connections
Release button
B-TWIG 12
| User manual
7