Special Functions; Cleaning - BOMANN MWG 2216 H EB Bedienungsanleitung, Garantie

After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
Note:
The auto functions and the convection mode with pre-heating
may not be used for gradual cooking.

Special functions

Auto start
functions or even of a combi setting. The maximum time-delay is
23 hours and 59 minutes.
Note:
First set the clock! Otherwise you may not use this function.
When using auto start, the defrost function is not available.
Example: Proceed as follows for automatically starting the micro-
wave:
desired microwave power setting.
settings.
3. Use the turning knob to set the desired cooking time.
4. Press the CLOCK/PRE-SET button. A signal tone sounds and
5. Use the turning knob to set the hour of the desired start time.
6. Press the CLOCK/PRE-SET button. A signal tone sounds and
7. Use the turning knob to set the minutes of the desired start time.
ing.
Example: 7:30 minutes cooking time at 100% power;
start time 14:20 o'clock
Step Button
1
2
CONFIRM
3
4 CLOCK/PRE-SET
5
6 CLOCK/PRE-SET
7
8
CONFIRM
26
Display
(Choose the
P100
performance settings)
7:30 (Cooking time)
10:45 (Current time)
14:45 (Set hour)
14:45
14:20 (Set minutes)
10:45 (Current time)
Note:
During this programmed setting the functions of the controls
are blocked (except: CLOCK/PRE-SET and STOP/CLEAR).
If you wish to display the start time again, press the CLOCK/
PRE-SET button.
When the pre-set time has been reached, the microwave will
start operation. Two signal tones will indicate the start.
Always supervise the device during operation.
When using the time-delay function, set the time in such a
way that the device will be operating under proper supervi-
sion.
Do not operate the microwave empty.
If you take the food earlier from the device, you will have to
terminate the function by pressing the STOP/CLEAR button.
After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
Locking (Child-proof lock)
Press and hold the STOP/CLEAR button for more than 3 seconds
to lock the device. The display will show the locked setting. The
functions of the controls are blocked. Press and hold the
STOP/CLEAR button again for more than 3 seconds to unlock.
Display function
current mode or temperature level.
-
the current time for 2-3 seconds when pressing the CLOCK/
PRE-SET button.
display the start time.
Turn the microwave off and remove the mains plug.
Interior
liquids on the walls of the oven can be removed with a damp
cloth. If the oven is very dirty a mild detergent can also be used.
Please do not use any abrasive detergents.
liquids regularly.
External Walls
a damp cloth. Please ensure that no water enters the openings
in the housing and therefore inside the device.
to avoid switching on the device so accidentally.

Cleaning

-