Inhaltsverzeichnis - Promise VTRAK J300s Kurzanleitung

VTrak J300s Task List
Step 1: Unpack the VTrak (below).
Step 2: Mount J300s Unit in a Rack (page 4)
Step 3: Install Disk Drives (page 4)
Step 4: Set Up Data Cable Connections (page 6)
Step 5: Set Up Serial Cable Connections (page 10)
Step 6: Connect the Power (page 11)
Step 7: Setup CLI Connection (page 12)
Step 1: Unpack the VTrak
The VTrak J300s box contains the following items:
• VTrak J300s Unit
• Quick Start Guide
• Null Modem Cable (1)
• 1.0m (3.3 ft) SAS cable (1)
Figure 1. VTrak J300s Front View (bezel removed)
The electronic components within the VTrak J300s unit are
sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
J300s or its subassemblies.
Disk Drive Carriers
• Screws for disk drives
(52 including 4 spares)
• 1.5m (4.9 ft) Power cords (2)
• CD with Product Manual and Quick
Start Guide
Warning
LED Panel
3
Step 1: Unpack the VTrak