Connection And Settings Of The Chartplotter; Settings Of The Chartplotter/Pc - Weatherdock easyAIS A025 Handbuch

Quick Instruction
Anschließen leicht gemacht
List Cable connection:
EasyAIS, Cable colour
Red
Black
White
Green
Yellow
Brown
1.5.2 Connection and settings of the
Chartplotter
The only thing you have to do is:
to connect the white (out +) cable to your input (+) of the NMEA port
to connect the green (out – ) cable to your input (-) of the NMEA port
Please find details of the settings in your Chartplotter manual. Every
chartplotter is a little bit different.
Nevertheless the main settings of your input NMEA channel should be:
Select the right input channel at your Chartplotter. (Some do have up to
3 and more input channels)
Set transmission data rate to 38400
Set the input channel of the chartplotter to the following bit
configuration: 8/N/1

1.5.3 Settings of the Chartplotter/PC

Weatherdock AG
Tel.:+49 911 376638-30
Function
Power supply, positive DC +9 ... +28V
Power supply, negative (and signal ground)
NMEA-out (+), AIS-Data ,
NMEA-out (-), AIS-Data
Additonal NMEA-in (+), e.g. GPS-data
(optional)
Additonal NMEA-in (-), e.g. GPS-data
(optional)
Sigmundstraße 180
www.easyais.de
9 of 28
D-90431 Nürnberg