Technical Data/Specification; External Nmea, E.g. Gps - Pass Through Easyais - Weatherdock easyAIS A025 Handbuch

Quick Instruction
Anschließen leicht gemacht
1.6.

Technical data/Specification

Receiver
•2 channel AIS receiver for AIS Signals on the frequencies 161.975 and
162.025 MHz
•Channel spacing:
•Sensitivity:
•Data rate:
•Antenna impedance:
Electrical performance:
•Power supply: 9V up to 28VDC @< 100mA
•Antenna connector:
•Cable for power supply and data:
Output:
•Default Baud rate:
(4,8kB can be set by Dealer on request or the
ambitioned sailor itself)
•Format:
•NMEA Telegramme:
Dimensions (overall):
•Length: 150mm, Width: 150mm, Height: 30mm
•Weight: app. 500gr.
1.7.
External NMEA, e.g. GPS – pass through
easyAIS
External NMEA data, e.g. of an external GPS, can be passed through to
the easyAIS. This input is optodecoupled. The yellow and the brown
cable are used for this feature. The yellow cable is the positive input for
the additional NMEA data (NMEA +). The brown cable is the negative
input for the additional NMEA data (NMEA -). Please be sure that all
external data need to be at a data rate of 4k8. All data is speeded up to
Weatherdock AG
Tel.:+49 911 376638-30
25kHz
-112dBm
9600Bps
50Ohm
BNC
6 pole plug, included
38,4kB
NMEA 0183
VDM
Sigmundstraße 180
www.easyais.de
11 of 28
D-90431 Nürnberg