What To Do If Not Working Properly - Weatherdock easyAIS A025 Handbuch

Quick Instruction
Anschließen leicht gemacht

1.10. What to do if not working properly?

Pos Problem
1 "ON" LED not
lit
2 Not either
Channel A or
Channel B LED
flickering
3
4 No AIS Targets
on the screen
Weatherdock AG
Tel.:+49 911 376638-30
Reason
Board power
No signals around
Antenna connection
bad
Not well connected to
the PC or the
chartplotter
Sigmundstraße 180
Solution
Please check the board
power connection
Are you in an area
with enough AIS
traffic?
Check your connectors
and your antenna
cable. Please be very
carefully with the
soldering of sockets
and plugs. Bad work
will cause a loss of
sensitivity.
This can be checked
with a PC and the
"Hyperterminal
software" of
Windows. You find
the Hyperterminal SW
under
/Programms/Accesories
/Communication/.
Connect the easyAIS
by means of the cable
and the SUB D9 plug,
which is also enclosed
to the serial port of
the PC. Please
D-90431 Nürnberg
www.easyais.de
14 of 28