Check And Service The Device At Regular Intervals; Clean The Device; Accessories And Options; Waste Disposal And Protection Of The Environment - walser mantona Bedienungsanleitung

8.1 Check and service the device at regular intervals

What should I do before using the device?
Damage:
Have the device checked by
a professional electrician.

8.2 Clean the device

WARNING
Electric shock hazard / fire risk (battery)
Use only the specified cleaning agents.
Do not bring the device into contact with moisture or water.
Cleaning
Device part Cleaning
Housing Remove light and stubborn dirt with a dry micro-fibre cloth

9. Accessories and options

You find the best accessories for your device in our web shop: www.foto-walser.de.

10. Waste disposal and protection of the environment

Dispose of the device at a legally specified collection point, such as with the manufac-
turer, electronics brands or at a local disposal depot. This service is free of charge.
24
11. Technical specifications
As needed
Battery built into the device
X
Power supply, charging voltage
Powerpack charge time
Standby time
Operating time
Weight of tripod head
Dimensions
Max. load bearing capacity
Max. load bearing capacity at 30° angle
Max. load-bearing capacity when vertical
Max. load-bearing capacity when han-
ging overhead
Permitted Operation Temperature
Storage Conditions
Li-Polymer - 1,200 mAh
Micro USB port, input DC 5V/1A
approx. 8 hours
approx. 50 hours
approx. 4 - 6 hours
approx. 505 g
67 x 90 x 90 mm
2 kg
2 kg
1.5 kg
1.5 kg
-10° C to + 45° C
Dry and dust-free at -20 °C to +50 °C
25