Summary Of Components And Control Elements; Summary Of The Device Parts; Short User Instructions - walser mantona Bedienungsanleitung

4. Summary of components and control elements

4.1 Summary of the device parts

1. LED display of degree/rotation radius
2. LED display of rotation duration/time
3. LED display of rotation direction
4. Adjustment knob for degree/rotation radius
5. Adjustment knob for rotation duration/time
6. Start/stop knob
7. Rotation direction selection DIR (direction)
8. Micro USB port (charging connector)
9. Display of battery charge status
10. ON/OFF switch
11. 1/4-inch connector thread on the top of the tripod head
12. Connector thread on the bottom of the tripod head (1/4-inch and 3/8-inch by remo-
ving the thread adapter)
13. Micro USB charging cable
18

4.2 Short user instructions

Note
Detailed instructions for the following activities can be found in the relevant sections
of these instructions.
Strictly follow the sequence of the following stages when using the device for the
first time to prevent damaging it.
WARNING
Whatever you do, pay attention to the safety notes in the corresponding paragraphs.
1. Charging battery / battery charge status
2. Mounting the device on a tripod
3. Attaching a recording device
4. Switching device On / Off
5. Adjusting the rotation angle
6. Adjusting the rotation time
7. Setting the rotation direction
8. Starting process
9. Stopping process
Note
Please note that we recommend a USB charger with a charging current of at least
5V / 1A (5V / 1000mA) for charging the internally installed battery of the device. In
the case of use of weaker chargers, problems may occur.
19