Oxford Presence Lifter Benutzerhandbuch Seite 7

Oxford ®
E n g l i s h
Presence
DISASSEMBLY
The lift should not be disassembled unless for service, repair or transport if necessary. Therefore
follow the assembly instructions in reverse sequence.
ALWAYS CHECK THE FOLLOWING BEFORE OPERATION
• The mast is fully locked into position.
• The legs of the lift open and close satisfactorily (This is done via the hand control).
• The red emergency stop button, located on the rear of the control box, is in the OFF (out) position.
7
294000.10007 Rev. D