Folding Mechanism - Eufab 14500 iBike Miniped Bedienungsanleitung

is activated. The Miniped is now ready to be ridden.
Turn the Miniped off by pressing the off switch once.
Activating/Deactivating the anti-theft alarm system
First, switch the Miniped off. Press the on switch once to activate the anti-theft alarm system. An acoustic
signal will sound.
You can set the sensitivity of the triggering sensor for the anti-theft alarm system to two levels: High,
very sensitive, triggered at the slightest movement of the Miniped. Low, in order to be triggered the
Miniped must be moved away from its spot. These settings are selected by pressing the search button
for 2 seconds.
Press the off switch once to deactivate the anti-theft alarm system.
5.3.3

Folding mechanism

Folding the Miniped
First switch the Miniped off before actuating the folding mechanism.
Loosen the quick-release mechanism of the seat post (Position 6 in the overview) and turn the seat tip
to the side (Image 15 to 18). Then lock the quick-lock again.
Image 15: Quick-lock
closed
Hold the Miniped firmly with one hand on the
handlebars. Use the other hand to push the locking
lever (Image 19) (Position 8 in the overview)
upwards on the frame. Now pull the frame upwards
and release the lever. Lift the frame with the seat
post until the locking mechanism audibly clicks into
place.
The Miniped has now been folded (Image 20) and
can be stowed away to save space or be
transported.
Image 16: Quick-lock
open
Image 17: Seat
straight
Image 19: Releasing the locking
mechanism
Image 18: Seat turned
Image 20: Folded
Miniped
Page 10 / 16