Front Light Assembly; Overview; General - Eufab 14500 iBike Miniped Bedienungsanleitung

Now put the battery into the mount as depicted in the following images, Image 5 to 7.
Image 5: Inserting the battery
Press the battery firmly into the mount at the top
end. When the battery makes contact with the
Miniped's electrical system, an acoustic signal will
sound. Hold the battery there firmly. Turn the key
clockwise as far as it will go, Image 8. Remove the
key. The battery is now firmly locked.
Ensure that the battery connections do not
come into contact with metal objects
during assembly. It may cause a fire and
explosion hazard.
5.1.4

Front light assembly

Insert the front light into the mount on the front of the MIniped's head tube using the sheet metal tabs.
Switch the front light on and adjust it so that the light beam shines onto the street approx. 10 m in front
of the Miniped. Turn the front light off again.
5.2

Overview

5.2.1 General Information
1 Front wheel
2 Front brakes
3 Suspension fork
4 Mount for front light
5 Handlebars
6 Seat
7 Quick-lock seat fastener
8 Locking lever, folding mechanism
9 Battery
10 Rear light
11 Back mudguard
12 Back brake
13 Back wheel with hub motor
14 Pedals
Image 6: Pressing the battery Image 7: Battery assembled
Image 8: Closing the locking
mechanism
Image 9: Overview, general
Page 7 / 16