Electrical Wiring Diagram, Controls; Anti-Theft Alarm; Safety Information; General - Eufab 14500 iBike Miniped Bedienungsanleitung

3.7

Electrical wiring diagram, controls

Battery
Reverb
LCD measuring device
Maximum speed

Anti-theft alarm

Anti-theft alarm
Brake light
4.

Safety information

4.1 General information
• The warning triangle identifies all instructions that are important for safety. Be sure to
always follow these, otherwise you could injure yourself or damage the device.
• Children are not allowed to play with the device.
• Cleaning and user maintenance cannot be performed by children without supervision.
• Do not leave the packaging material lying around. It can be a dangerous toy for children!
• Only use this product for its intended purpose!
• Do not tamper with or disassemble the device!
• For your own safety, only use accessories or replacement parts that are listed in the
instructions or the usage of which is recommended by the manufacturer!
• Adjust the seat height so that you can ride safely and comfortably and are able to place
feet on the ground quickly.
• Before each ride, ensure that the brakes function, the tire pressure is ok, and that all fixtures
are in faultless condition.
• Ensure that accessory parts are mounted at the right positions and familiarise yourself with
the functions.
• When using the Miniped for the first time, first try it out on a short, safe section of road.
Only drive in road traffic when you have good control riding the Miniped.
• A quick-release lever that isn't completely closed can re-open. This can lead to serious
falls. Turning the quick-release lever must be so difficult that the heel of the hand is required
to do so. Only then is the tension strong enough.
• Always wear a helmet.
• Wear bright and noticeable clothing. Be sure not to wear loose clothing that could get stuck
in the chain, handlebars, pedals or wheels.
Battery +
bold, red
Battery -
bold, black
bold, blue
bold green
bold yellow
thin red
thin yellow
thin blue
thin green
thin black
thin red
Energy
thin blue
Measuring signal speed
thin green
Signal throttle valve
thin black
GND
Brake signal
thin white
thin white
thin white
thin orange
Lock ACC
thin blue
Lock motor CLK
Phase detection line
thin green
Line FE1
thin red Battery + ACC
Battery – GND
thin black
thin orange
Lock ACC
thin black
Brake signal
thin violet
black
red
yellow green blue
Page 4 / 16