Atag One Montageanleitung Seite 7

1. Install ATAG One:
-
-
-
-
2. ATAG One thermostat:
WIFI CONFIGURATION
How would you like to
connect your ATAG One
to Wi-Fi?
APP MANUAL SKIP
Remember me
3. Start One-app.
E-mail address
-
Password
Reset
LOGIN
-
Registrer user
Wi-Fi configuration
Skip login
Screw the mounting plate of the ATAG One against
the wall (at the place of the old thermostat).
Turn off the power supply to the boiler.
Connect the ATAG One to the boiler. If necessary: see
the connection scheme of the BCU for connecting the
power supply and thermostat cables.
Place the battery in ATAG One. Hook and click the
ATAG One to the base plate and switch on the power
supply to the boiler.
At first start:
Select your language and follow all steps until WIFI
CONFIGURATION and select: "APP".
(In case ATAG One is already connected and you want
to leave or check the P-number and installer data:
Go to SETTINGS/CONFIGURATION/WI-FI
RECONFIGURATION and select: "APP").
Enter the email address and the password of your
authorised installer account*.
Press LOGIN
*Your account has to be authorised by ATAG.
If login fails, please contact ATAG.
GB