Aux In Operation - auna Verticalo DAB Bedienungsanleitung

BT OPERATION
1. Turn on the unit.
2. Press the MODE button to select the BT mode. "BT Connecting" will be
shown on the screen.
3. Turn on your BT device and search for "Verticalo" and pair.
4. Once your BT device is successfully paired with the unit, you will hear
a short confirmation sound from the unit. The display will show "BT
connected"
5. Select and play the audio files though your BT device.
6. To skip to the next or previous track, rotate the "TUNE' of the unit or
select from your BT device.
7. To stop this function, switch to other mode or shut down your BT of your
BT device
USB OPEATATION
1. Turn on the unit.
2. Press the MODE button to select the USB mode. "USB"will be shown on
the screen.
3. Insert a USB disk into the USB socket. "Reading" will be shown for a few
seconds, playback will start automatically. If no USB disk, "NO USB" will
be shown on the screen.
4. During the playback, press the PLAY/PAUSE button to pause, press it
again to resume playback.
5. To skip to the next or previous track by rotating the TUNE knob.

AUX IN OPERATION:

1. Turn on the unit.
2. Connect the 3.5 mm audio cable between your external device and the
AUX jack of the back of the unit.
3. Press the MODE button to select the AUX IN mode. "AUX IN "will be
shown on the screen.
4. Play the music from your external device from the unit.
EN
21