Operation - EuroLite IR remote for LED effects Bedienungsanleitung

EUROLITE IR remote for LED effects
For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen a EUROLITE IR remote for LED effects
Please note that this remote control is individually available or as a set.

OPERATION

The LED effects with DMX connection have two operating modes. It can be operated via IR remote control or
it can be run in DMX-controlled mode via a DMX controller. If the device is controlled via a DMX controller
the remote control is deactivated.
Operation via optional remote control
The LED-effects are controlled via the optional 51914130 EUROLITE IR remote for LED effects. This
controller is always needed, e.g. for setting the DMX starting address of the LED effect.
Direct the remote control towards the front of the IR sensor. The maxium operating range is 10 meters.
USER MANUAL
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
6/8 00062838.DOC, Version 1.0