Repair
10
Repair
Repair is not envisaged for the point level switch.
10.1
Spare parts
The web site for the W@M Device Viewer (www.endress.com/deviceviewer): All spare parts
for the measuring device are listed here together with the order code and can be ordered here.
If available, users can also download the associated Installation Instructions.
10.2
Return
The measuring device must be returned if repairs or a factory calibration are required, or if the
wrong measuring device has been ordered or delivered. According to legal regulations,
Endress+Hauser, as an ISO-certified company, is required to follow certain procedures when
handling returned products that are in contact with medium.
To ensure swift, safe and professional device returns, please read the return procedures and
conditions on the Endress+Hauser website at
10.3
Disposal
When disposing, separate and recycle the device components based on the materials.
11
Accessories
Detailed information on accessories can be found in the technical documentation
TI01147F.
Designation
Weld-in adapter
Seals, o-rings
Plug-in jack M12
with cable 5 m (16 ft)
Socket wrench for mounting
Test magnet
64
www.services.endress.com/return-material
Additional information
Detailed information on the weld-in adapters can be found in
TI00426F/00/EN and in the supplementary documentation → 39.
IP67, coupling nut (Cu Sn/Ni)
• Straight, order number: 52006263
• Elbowed 90°, order number: 52010285
Hexagon bolt, AF32, order number: 52010156
Order number: 71267011
Liquiphant FTL31
Endress+Hauser