Glomar EPG Plus Bedienungsanleitung Seite 6

Bedienungsanleitung EPG Plus
_____________________________________________________________________________
8. Technische Daten
Gewicht des kompl. Gerätes:
Preßkraft:
Antriebsmotor:
Akkuspannung:
Akkukapazität:
Akku-Ladezeit:
Preßzeit:
Pressungen pro Akku:
Hydrauliköl:
Umgebungstemperatur:
Schalldruckpegel:
Vibrationen:
Hinweis
Wenn Sie einmal Unterstützung bezüglich dieses
Gerätes benötigen, so rufen Sie bitte unser
SERVICE-CENTER an.
Tel.: ++ 41 (0)71 841 70 70
Fax: ++ 41 (0)71 841 70 18
Anmerkung
Diese Bedienungsanleitung kann jederzeit kostenlos unter der
Bestell-# HE.7516 nachbestellt werden.
ca. 4,15 kg (inklusive Akku)
ca. 60 kN
Gleichstrom
Permanentfeldmotor
12 V
3.0 Ah
ca. 1 h [LG 1],
bzw. ¼ h [LG2]
3 s bis 6 s (abhängig vom
Verbinderquerschnitt)
ca. 200 Pressungen
(Cu 150 mm² DIN 46235)
ca. 65 ml "AVIA HVI 15"
-20°C bis +40°C
75 dB (A) in 1m Abstand
< 2,5 m/s
(gewichteterEffektivwert der
Beschleunigung)
Instruction Manual
for the electric-hydraulic crimping unit Type EPG Plus,
Serial-No. ............................
Index
1 Introduction
2 Labels
3 Warranty
4 Description of the electric-hydraulic crimping unit
4.1 Description of the components
4.2 Brief description of the important features of the unit
4.3 Description of the light diode display
5 Remarks in respect of the determined use
5.1 Operation of the units
5.2 Explanation of the application range
5.3 Mounting instructions
5.4 Service and Maintenance instructions
5.5 Remarks on the use of the Battery Cartridge and Charger
5.6 Storage and transport of the crimping unit.
6 Troubleshooting
7 Putting out of service/waste disposal
8 Technical data
Symbols
Safety warnings
Please do not disregard these instructions in order to
avoid human injuries and environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the
pump unit.
1. Introduction
Before starting to use the tool please read the
instruction manual carefully.
Use this tool exclusively for its determined use.
Mounting and assembly of connecting material with the help of this
tool must only be performed by specially trained personnel. The
minimum age is 16 years.
This instruction manual has to be carried along during the entire life
span of that tool.
The operator has
- to guaranty the availability of the instruction manual for the user
and
- to make sure, that the user has read and understood the
instruction manual.
2. Labels
On the labels fixed on the housing of the tool you'll find the type
specification name of the manufacturer and the company logo. On
the opposite side of the housing you'll find a label with a brief
presentation of the scope of manageable cross-sections for copper
and aluminium, the pressing force and the serial number.
On the crimping head you'll find a warning against possible injuries
during the crimp process.
3. Warranty
If correct operation is guaranteed our warranty is 6 months from the
time of delivery.
Seite 6